Fill 'er up!


Underlay


Liner


Water
Posted by Picasa

Comments

Post a Comment

Popular posts from this blog

Buiding a frame.

Image
The pond is about 15000 liters (4000 gallons) and 1.5 meters (5ft) deep at the lowest point. For this pond, we decided that a treated wood frame would make an ideal attachment point for the pond liner. On one side there was a lot of gravel so concrete footings were used to keep the 4x4 posts level and solid. 3ft rebar was pounded through the posts at 2ft intervals. Once the liner is in, cedar 2x6 boards will cover the liner and create a small overhang around the pond. There will also be a 4ft wide bridge spanning the center, to access the patio. There will be a bench that hangs over the pond in one corner. All pipes, electrical and other connections will be built inside the bench and hidden from view. This means that the liner doesn't need to be punctured for bulkhead fittings. The entire design also means that the liner can be removed or replaced fairly easily. Just remove the cedar trim and pull out the liner. We're working on a design for an in-pond skimmer that will also hi...
Read more

Lessons learned

Image
Lessons: 1. Skimmers are important when you live next to a forest. 2. Liners that are glued together might leak. Brian has been fighting leaks on this one. We'll order a single liner when we do ours. We're also going to try to avoid having any holes in the liner for pipes or drains. 3. It's worth having a bottom drain, or at least a low spot where a pump can sit. 4. Salamanders love ponds. There are dozens in this pond and they often get stuck in the pump or skimmer. 5. It is difficult to modify a pond or remove the liner when rocks are mortared in along the edge. We'll try to make our next pond more serviceable.
Read more